MARIMEX Pool Orlando 3,66 x 0,91 m RATAN, pool, foil, skimmer

The Orlando pool in rattan is a pool designed for year-round use. It does not need to be dismantled and cleaned after the swimming season, but it is enough to winterize it properly and then re-winterize it the next year before the swimming season and start using it again. By leaving it in the garden outside the bathing season, you save time, money on water and, most importantly, the water itself. If you winterize the pool outside, more than 80% of the water will remain in the pool and be reused the following season. This is an ecological solution for winterizing your pool.

Other advantages of the Orlando pool are its stable and solid construction, galvanized pool wall, wide water level and easy operation. All you have to do is prepare the pool site, roll out the pool mat, unpack the pool and assemble it. From unpacking the pool, you can be filling the water within 120 minutes. The pool walls are made of corrosion-resistant steel sheet, and the pool liner is frost-resistant. We recommend covering the pool with a cover after swimming. The pool liner is replaceable - if the pool is damaged, you can buy it as a spare part.


The Orlando pool in rattan is a pool designed for year-round use. It does not need to be dismantled and cleaned after the swimming season, but just winterized properly and then re-winterized and used again the following year before the swimming season. By leaving it in the garden outside the bathing season, you save time, money on water and, most importantly, the water itself. If you winterize the pool outside, more than 80% of the water will remain in the pool and be reused the following season. This is an ecological solution for winterizing your pool.

Other advantages of the Orlando pool are the stable and solid construction, the galvanised pool wall, the wide water level and the ease of operation. All you have to do is prepare the pool site, roll out the pool mat, unpack the pool and assemble it. From unpacking the pool, you can be filling the water within 120 minutes. The pool walls are made of corrosion-resistant steel sheet, and the pool liner is frost-resistant. We recommend covering the pool with a cover after swimming. The pool liner is replaceable - if the pool is damaged, you can buy it as a spare part.

The pool liner is made of soft PVC. The quality workmanship will ensure long-term trouble-free use of the pool.

Wall thickness: 0.25 mm / bottom thickness: 0.25 mm

inner foil motif = blue

outer foil motif = rattan

Advantages of the Orlando pool:

- Durability

- Can be recessed

- Year-round solution

- Saves money and water

You can connect both cartridge and sand filtration to your pool. For the connection of the filtration, there are passages through the pool wall to which the Olympic skimmer and a 32 mm (5/4") hose are connected. For better and faster filtration, we recommend buying a sand filtration.

Included:

Orlando pool (grey steel wall, foil and rails)

Instructions

small installation material needed to build the pool (rails, connectors, etc.)

Olympic skimmer

Other accessories (steps, mat, cover) must be purchased separately.
The pool is also suitable for use with salt water and can be connected to a solinator (provided the filtration has sufficient power for the solinator).
The instructions for assembling the pool include accessories that are not included in the package and must be purchased separately.

The dimensions of the pool are only approximate and may be affected by the flatness of the substrate or the volume of water to be filled. The manufacturing tolerance is 5%.

Orlando pool recessing:

The Orlando pool can be partially or completely in-ground. For comfortable and safe use, all construction recommendations and measures for embedding must be observed. The pool must stand on level ground, not on a load. The groundwater level at the construction site must be verified and eliminated prior to embedment. It is recommended to restrict access to the pool so that it is not a hazard to children or animals. It is also important to think about the location of filtration and other accessories in case of embedment.

Orlando pool storage:

Orlando pools do not need to be cleaned outside of the swimming season, they can remain set up all year round. However, after the swimming season is over, the pool must be winterized - drain the water so that the water level is about 10 cm below the skimmer and close the return nozzle with a plug. Disconnect the filtration and other accessories and apply pool winterisation chemicals to the pool. If you cannot disconnect the hoses, lower the water level 10 cm below the return nozzle. Afterwards, the hoses must be drained of water to prevent frost from damaging them.
We strongly advise against draining the entire pool and removing the pool liner from the pool structure. The pool could collapse and damage could occur.
Parameters:
Pool diameter: 3.66 m
Pool: without filtration
Pool height: 0.91 m
Colour: rattan
Water level diameter: 3.66 m
Total volume of water in the pool: 7.7 m3
Construction: steel wall
Pool shape: circle

Dimensions of 1 piece of packed goods: height - 38,00 cm; width - 91,00 cm; length - 38,00 cm; weight: 41,00 kg.