Šakotuvas 9 prievadų, 8 PoE prievadų...

Patvirtinimai
Cheminių komponentų sertifikavimas CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
EMC CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
Saugumas CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Bendra
Matmenys (P × A × G) 170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
Bendras svoris 1.114 kg (2.45 lb)
Installation Mode Desk-Mounted,Wall-Mounted
Maks. energijos suvartojimas 120 W
Grynasis svoris 0.35 kg (0.77 lb)
Darbo drėgmė 5% to 95% (no condensation)
Darbinė temperatūra 0 °C to 40 °C (32 °F to 104 °F)
Energijos sunaudojimas miego režime 10 W
Maitinimo šaltinis 54VDC，2.22A
Santykinė drėgmė 5% to 95% (no condensation)
Rėmas Metal material, fan-free design
Sandėliavimo temperatūra -40 °C to 85 °C (-40 °F to 185 °F)
Apsauga nuo viršįtampių 6 kV

Tinklo parametrai
Vidinė cache atmintis 4 Mbits
MAC adresų lentelė 8 K
Paketų perdavimo sparta Whole-Device Performance: 4.17 MppsPort Performance: 2.68 Mpps
Prievadai 8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
Perjungimo našumas Whole-Device Performance: 5.6 GbpsPort Performance: 3.6 Gbps

PoE
Maks. PoE prievadų galia 30 W
PoE prievadas PoE: Ports 1 to 8
PoE maitinimo biudžetas 110 W
PoE galios jungtis 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE standartas IEEE 802.3af,IEEE 802.3at

Programinės įrangos funkcijos
ACL \
HPP Support one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
IPSG \
Ilgo diapazono režimas Ports 1 to 8: up to 300 m.Long range performance may vary depend on camera model or cable condition.
Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP.Support 802.1w RSTP.
PoE Watchdog Ports 1 to 8: auto detect and restart the cameras that do not respond.
Prievadų izoliacija Ports 1 to 8: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
Prievado greičiolimitas \
Paslaugų kokybė (QoS) \
System Maintenance Support device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support port mirroring for fault locating.
VIP Port \
VLAN VLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 4094 VLAN.

Pastebėjote klaidą prekės aprašyme ar nuotraukų galerijoje? Praneškite mums.

Skaityti daugiau

Skaityti mažiau