BETAFPV AIR65 II CHAMPION ELRS 2.4G

Power and resilience in a lightweight design

Air65 II Brushless Whoop Quadcopter is a whoop-style racing drone for indoor flying and short FPV runs. It combines an ultra-lightweight design with a reinforced build, so it stays agile while better withstanding contact with obstacles. It is a good choice for pilots who expect quick stick response and stable performance in tight spaces.

Key advantages

• Three flight configurations – choose the version to suit your flying style: racing, technical flying or smooth freestyle.
• 0702 brushless motors – you get rapid acceleration and better throttle control.
• Matrix 5IN1 II FC – you get a more powerful control system with 12 A continuous ESC.
• 3-point mounting – the frame withstands impacts better and reduces the risk of damage to the electronics.
• Reinforced 1.0 mm PCB – the structure performs more reliably during frequent landings and collisions.
• Adjustable camera angle 15°–45° – set the view for calm cruising or dynamic racing.

Three drive versions

The model comes in three variants: Champion , Racing and Freestyle . Each has a different motor and propeller combination, so the drone responds according to its intended use. The Champion version focuses on maximum thrust, Racing on sharp throttle response, and Freestyle on smoothness and energy efficiency.

0702 brushless motors

The 0702 Brushless Motors (2026) used in the series feature a 0.1 mm stator core and matched magnetic and winding solutions. In practice, this translates into more efficient power delivery and better response to changes in RPM. In the Champion version, the combination of 0702 36000KV motors and GF 1207 3-B propellers delivers the highest thrust, while Racing and Freestyle offer a more controlled flying feel.

More stable electronics

Matrix 5IN1 II FC combines the flight controller, receiver and ESC in one compact design. 12 A continuous current provides headroom during sudden manoeuvres, and the 3-point mounting reduces the transfer of impact energy to the board. As a result, the equipment stays flight-ready for longer, and the user spends less time on repairs after a crash.

Reinforced camera guard

The Air II Canopy uses improved materials and additional reinforcements in critical areas. The revised profile improves camera protection during contact with obstacles, and the angle adjustment from 15° to 45° makes it easier to match the view to your flying style. It is a practical solution when you want to move more quickly from indoor training to more dynamic flights.

Frame for frequent impacts

The Air65 II / Champion Frame has optimised ducts, stiffening connectors and a PP blend that increases resistance to loads during landings and collisions. In the Champion version, the thrust-to-weight ratio is 6.3:1 , so the drone picks up speed quickly and exits tight turns much more effectively. This characteristic works well where quick flight-path correction and confidence in limited space matter most.

Choose your style

Air65 II gives you three distinct flight personalities, so you do not have to adapt to just one setup. Champion delivers a powerful launch and aggressive dynamics, Racing gives a quick response on technical sections, and Freestyle maintains the smoothness needed for more cinematic flying. This makes it easier to choose a configuration for your skill level and track type without compromising controllability.

Package contents

Air65 II Brushless Whoop Quadcopter | Champion

• 1 * Air65 II Brushless Whoop Quadcopter | Champion
• 4 * GF 1207 3-B propellers
• 4 * M1.4*2 screws
• 1 * Air II Canopy
• 2 * M1.4*5 self-tapping screws
• 4 * M1.4*4 self-tapping screws
• 2 * H0.8 damping balls
• 1 * Type-C to SH1.0 adapter board
• 1 * SH1.0-4Pin adapter cable

Air65 II Brushless Whoop Quadcopter | Racing

• 1 * Air65 II Brushless Whoop Quadcopter | Racing
• 4 * GF 1207 3-B propellers
• 4 * M1.4*3 screws
• 1 * Air II Canopy
• 2 * M1.4*5 self-tapping screws
• 4 * M1.4*4 self-tapping screws
• 2 * H0.8 damping balls
• 1 * Type-C to SH1.0 adapter board
• 1 * SH1.0-4Pin adapter cable

Air65 II Brushless Whoop Quadcopter | Freestyle

• 1 * Air65 II Brushless Whoop Quadcopter | Freestyle
• 4 * GF 1219S 3-B propellers
• 4 * M1.4*3 screws
• 1 * Air II Canopy
• 2 * M1.4*5 self-tapping screws
• 4 * M1.4*4 self-tapping screws
• 2 * H0.8 damping balls
• 1 * Type-C to SH1.0 adapter board
• 1 * SH1.0-4Pin adapter cable