MOES S03-CGS-EU-MS Carbon Monoxide and Smoke Detector
Keep your home safe with the multifunctional MOES S03-CGS-EU-MS detector, which continuously monitors carbon monoxide (CO) levels, flammable gases, and the presence of smoke. The device uses an electrochemical CO sensor and a photoelectric smoke sensor, and if a hazard is detected, it triggers an audible alarm with a volume of at least 85 dB and a visual indicator. The easy-to-read display shows current measurements, including air temperature and humidity, and a three-color indicator makes it easy to assess the situation. Additional features include a built-in 1000 mAh battery, adjustable screen brightness, and the ability to customize gas detection sensitivity.
Detect Hazards in Time
The MOES S03-CGS-EU-MS measures carbon monoxide concentrations in the range of 0 to 999 ppm, and the default CO alarm threshold is 49 ppm. The device also detects flammable gases, such as methane and butane, as well as smoke, using a photoelectric sensor. This makes it ideal for use in rooms with gas stoves, water heaters, or fireplaces, among other settings, ensuring continuous monitoring of various types of hazards.
Clear Hazard Level Indication
The sensor uses a three-level light indicator in green, yellow, and red, allowing you to easily identify the current hazard level. For carbon monoxide, green corresponds to a concentration of 0–49 ppm, yellow to 50–99 ppm, and red to values exceeding 99 ppm. For flammable gases, these levels are, respectively, below 5% LEL, from 5% to below 15% LEL, and at least 15% LEL. In the case of smoke, however, the indicator displays values below 0.15 dB/m, from 0.15 to below 0.30 dB/m, and 0.30 dB/m or higher. This allows the device to quickly assess the indicated hazard level.
Audible and visual alarms—don’t miss a warning
When the sensor detects a dangerous level of monitored substances or smoke, it will alert you with an audible alarm of at least 85 dB and a visual alarm. This allows you to quickly notice the warning and take appropriate action. The device also features a mute function that can be activated using a button on the front panel. The indicator’s flashing frequency depends on the type and level of the detected hazard—for gases, it is 1 s, 0.5 s, or 0.25 s, and for smoke, 0.5 s.
Monitor Temperature and Humidity
In addition to detecting hazards, the MOES S03-CGS-EU-MS also provides information about indoor conditions. On the color display, you can check the current temperature and relative humidity. The humidity measurement range is from 0% to 95% RH, with a tolerance of ±5%, under non-condensing conditions. All the most important information is displayed on a single screen, making it easy to monitor both safety and environmental conditions.
Convenient operation and settings adjustment
The well-designed control panel provides quick access to the device’s most important functions. The central button turns the sensor on and performs a self-test, while separate controls are used to adjust the display brightness and mute the alarm. You can also adjust the sensitivity for detecting flammable gases—level S1 indicates lower sensitivity for methane, while S2 provides higher sensitivity for butane, alcohol, and other flammable gases.
Operates Even During a Power Outage
The MOES S03-CGS-EU-MS is powered by a 100–240 V, 50/60 Hz electrical outlet. It also features a built-in 1000 mAh rechargeable battery that provides temporary emergency power in the event of a power outage. This allows the device to continue operating even if the mains power is unexpectedly cut off.
Easy Installation and Sturdy Construction
The sensor features a compact housing measuring 125.5 × 60.5 × 36.3 mm, so it doesn’t take up much space. The replaceable plug allows for easy replacement of the power connector without tools, enhancing user convenience. The housing is made of flame-retardant ABS plastic, and the operating temperature range is from -10°C to 50°C.
Included in the package
-
MOES sensor x1
-
User manual x1
-
Plug x1
-
Packaging safety insert x1
|
Manufacturer
|
MOES
|
|
Model
|
S03-CGS-EU-MS
|
|
Carbon monoxide detection technology
|
Electrochemical
|
|
Smoke sensor type
|
Photoelectric
|
|
CO measurement range
|
0–999 ppm (±10%)
|
|
Default CO alarm threshold
|
49 ppm
|
|
CO concentration levels
|
Green: 0–49 ppm; yellow: 50–99 ppm; red: above 99 ppm
|
|
Flammable gas detection levels
|
GAS Lv1–Lv3 (Lv3: ≥15% LEL)
|
|
Flammable gas alarm threshold
|
GAS Lv2 (≥5% LEL)
|
|
Flammable gas concentration levels
|
Green: below 5% LEL; yellow: 5% to below 15% LEL; red: ≥15% LEL
|
|
Smoke alarm threshold
|
≥0.15 dB/m
|
|
Smoke levels
|
Green: below 0.15 dB/m; yellow: 0.15 to below 0.30 dB/m; red: ≥0.30 dB/m
|
|
Gas detection sensitivity adjustment
|
S1 (low sensitivity for methane), S2 (high sensitivity for butane, alcohol, and other flammable gases)
|
|
Humidity measurement range
|
0–95% RH (±5%, non-condensing)
|
|
Temperature measurement
|
Yes
|
|
Alarm signaling
|
Audible and visual
|
|
Alarm volume
|
≥85 dB
|
|
Hazard level indication
|
Three-level (green, yellow, red)
|
|
Gas indicator flashing frequency
|
Green: 1 s; yellow: 0.5 s; red: 0.25 s
|
|
Smoke indicator flashing frequency
|
0.5 s
|
|
Alarm Mute Function
|
Yes
|
|
Self-Test Function
|
Yes
|
|
Display Brightness Adjustment
|
Yes
|
|
Mains Power Supply
|
100–240 V, 50/60 Hz
|
|
Backup Battery
|
Built-in, 1000 mAh
|
|
Replaceable plug
|
Yes
|
|
Housing material
|
Flame-retardant ABS plastic
|
|
Operating temperature
|
–10°C to 50°C
|
|
Dimensions
|
125.5 × 60.5 × 36.3 mm (without plug)
|