Mobile Origin 140W Dual Charge USB-C Cable 1.2 m CB10

Mobile Origin Dual charging cable 140W, CB10, USB-C, 1.2 m

The Mobile Origin CB10 is a USB-C Y-cable that powers two devices simultaneously from a single USB-C output. It's useful when you only have one powerful charger available and don't want to carry a second adapter or another cable. It supports input up to 140W, intelligently distributes power between both branches, and also handles USB 2.0 data transfer.

• Two USB-C outputs from one charger: simultaneous charging of a laptop and phone without a splitter or second adapter.
• Up to 140W input: ready for USB PD 3.1 EPR and powerful laptop chargers.
• Smart power distribution: the cable doesn't allocate power fixedly, but according to the requirements of the connected devices.
• Wide fast charging support: PD 2.0, PD 3.1, PPS, QC, and other protocols including support for Samsung Super Fast Charging 2.0.
• Braided nylon, aluminum Y-housing and USB 2.0 480 Mbps: more durable construction and the ability to charge and transfer data.

One charger for two devices.

CB10 solves the situation when you only have one USB-C charger at hand, but need to power up both your laptop and phone at the same time.

Simply connect the input connector to your charger, and the two output branches will charge both devices without the need for another adapter or a second cable. Whether at your desk, in a hotel, or on the go, it means fewer accessories in your bag and fewer occupied power outlets.

Power up to 140 W and intelligent power distribution.

The cable is designed for output of up to 140 W according to USB PD 3.1 EPR, making it suitable even for modern laptop chargers. Inside, three Injoinic chips continuously evaluate the power requirements of both connected devices and distribute power between them according to their actual needs. This means the power is not simply split in half. With a 130 W charger, the cable can deliver up to 112 W to the higher-powered branch and 18 W to the other. With 100 W, the power is distributed as 50 W + 50 W.

Thanks to support for PPS, PD, and other fast-charging protocols, it makes sense for use with a laptop and phones from various brands, from Apple, Samsung, Huawei, and Xiaomi to Oppo, as well as with a pair of tablets. If you use a lower-powered adapter, the cable will still work, but you should keep in mind that the available power will be shared between the two devices.

Samsung Super Fast Charging 2.0

CB10 supports PPS, which means that with compatible Samsung Galaxy phones, it can enable Samsung Super Fast Charging 2.0 at up to 45 W.

The difference is especially noticeable with models that support charging at higher power than the standard 25 W, as the cable does not only transfer power, but also ensures the correct communication between the charger and the phone.

To use this feature to its full potential, you need a charger with PPS support and sufficient power of 45 W or more. With devices that do not support PPS, the cable will still work, but charging will switch to the protocol supported by the specific phone.

E-Mark chip in every connector

Each connector is equipped with an E-Mark chip, which communicates the cable’s capabilities when connected. This is especially important for 5 A cables and power delivery of up to 140 W, as both the charger and the connected device need to know that the cable is designed for this level of performance.

Thanks to this, power negotiation can take place correctly and without unnecessary limitations. This electronic identification is what sets a high-performance cable apart from cheaper alternatives that may have the same connector but cannot reliably declare their specifications.

Port layout

The layout is simple: one USB-C input for the charger and two USB-C output branches for your devices. CB10 is designed to power two USB-C devices from a single source, making it ideal for setups such as laptop + phone, tablet + phone, or two mobile devices at the same time.

Data transfer

In addition to charging, the cable also supports USB 2.0 data transfer at speeds of up to 480 Mbps. This is sufficient for transferring photos, documents, smaller videos, or for regular phone-to-computer synchronization without having to disconnect the power supply.

CB10 is therefore especially useful in situations where charging is the main priority, with occasional data transfer available in the same accessory.

Construction, temperature and dimensions

The outer braided nylon protects the cable against abrasion while also helping to reduce tangling during everyday use. Inside, the cable uses tinned copper conductors, which matches its focus on high-power charging.

The central Y-shaped housing features an aluminium upper section that helps dissipate heat from the control electronics. Under a 130 W load in an environment with an ambient temperature of 25 °C, the cable surface remains below 40 °C and the housing below 55 °C, so the cable does not overheat even under higher load.

Cable length

The total cable length is 1.2 m, and the branch layout is designed for comfortable desk use. Approximately 80 cm of cable runs from the charger to the central housing, and each output branch is 40 cm long, making it easy to reach both a laptop and a phone placed next to each other.

This makes it suitable for a work desk, bedside table, or travel setup with a compact charger.

Specifications

Package Contents

1 x Mobile Origin CB10 Dual Charge USB-C Cable 1.2m

User Manual