„Mto Electric As“ neutralus gnybtas N14-S, mėlynas

Bridge N 14-S, screwless, IP20, blue, 80A, DIN, size 90x17x35mm. Splitter clamps - bridges on the carrier rail are widely used in low voltage switchboards or in other applications where we need to connect multiple conductors to one potential. It is used e.g. as a neutral bridge "N" or as a bridge for a protective conductor "PE". The bridges are produced as uncovered (IP00) or covered (IP20), in the colour variants grey, black, blue and green-yellow. The number of connection points ranges from 7 to 15 with a maximum cross section of 16 mm2. The terminals are designed for mounting on a 35 mm DIN rail. The wires are attached to the terminals after stripping by means of a screw connection. The screw fits directly onto the conductor, therefore it is necessary to provide the finely salted conductors with a cavity. However, the cavity increases the cross-section of the conductor and it is therefore necessary to connect salted conductors an order of magnitude smaller than the specified cross-sections. This is not necessary for solid conductors.
Brand
POLLMANN
Main line clamps
Rated current
80 A

Mounting method
DIN rail mounted

Width
17 mm

Height
35 mm

Depth
90 mm

Connection type
Screwless

Number of poles
1

Safe to touch
Yes

Number of inputs
15

Suitable for wires with fine wires
No

Suitable for solid cores
Yes

Suitable for multi-core conductors
Yes

Suitable for fine wire conductors without terminations
No

Suitable for finely wired wires
No

Suitable for finely wired conductors without terminations
No

Conductor cross-section access
2.5 - 16 mm2

AWG wire gauge access
6 - 14 mm2