Dėklas Iphone Lcd „iPhone 12 Pro Max“ LCD ekranas + jutiklinis blokas, diagnostinis, taktinis, „True Color“

Tactical True Color replacement LCD display with touch glass and frame. Tactical True Color displays excel with 100% identical viewing angles and dimensions and exceptionally low power consumption, which is up to 30% lower than conventional non-branded displays, thus extending battery life. They are made with advanced technology that ensures exceptional resistance to damage when dropped, but also to scratches. True Tone support is a given for clear color reproduction, as well as Haptic Touch. Precise touch response, perfect fit and finish. The displays are factory-applied with an oleophobic coating, anti-fingerprint and easy to clean during normal use. If your display has been damaged by a drop or is scratched or otherwise damaged, the Tactical True Color display is the best choice for replacement. Features: - display type incell LCD - Brightness 550 - 650 nits - True Color for color reproduction like the original - HDR support for vivid colors and details - 30% lower power consumption - significantly increased resistance to damage - True Tone support - Haptic Touch for intuitive control - Precise touch response - Perfect workmanship and fit - Oleophobic coating for protection against fingerprints and better cleaning This part can independently perform diagnostics by following these steps: 1) Click "Restart and complete repair" 2) then click "Continue" 3) Connect to WiFi network 4) Agree to Apple collecting diagnostic data. 5) Wait for the configuration to complete 6) Click "Continue" 7) Wait for the next configuration to complete 8) Then everything is done The LCD will not appear as unknown. Includes: LCD Display Glass with Haptic touch Frame in the color of the phone For proper Face ID function, the system must be updated to IOS 15.2 Warning: Pay attention to antistatic protection: Work on an antistatic mat and, if necessary, use an antistatic wristband. Check that all parts that could be subject to static electricity are properly taped with antistatic tape. Test the LCD properly before installation (touch functionality, colors, brightness, sensor functionality, correct pixel display) Perform the installation with the battery disconnected and make sure that the connectors are properly connected to each other, perform a proper check again after installation.