MikroTik HS-85DLC05D
Industrial SFP module supporting 1G and 2.5G data rates for multimode optical fiber with a range of up to 550 m.
The module operates at a wavelength of 850 nm and uses an LC duplex connector, making it a compatible and easy-to-deploy option for enterprise networks, industrial environments, and ISP infrastructure.
It supports 2.5G, allowing you to increase network throughput without having to replace your existing optical infrastructure.
Support for 1G and 2.5G data rates in a single SFP module.
Transmitter optical output power in the range of –9 to –3 dBm.
Receiver sensitivity (OMA) up to –18 dBm at BER < 1 × 10–10.
Built-in DDM digital diagnostics for monitoring optical power, voltage, temperature, and laser diode current.
Designed for enterprise networks, ISP infrastructure, and industrial applications.
The DDM digital diagnostics module continuously monitors optical power, supply voltage, operating temperature, laser diode current, and other parameters. Users can set custom threshold values for alerts when limits are exceeded, which facilitates proactive network management and maintenance planning. This allows for the timely detection of abnormal conditions, the setting of custom thresholds, and the planning of maintenance or network expansion based on actual operational data.
Loss of Signal (LOS) Indication: The LOS output is implemented as an open collector with a logic 0 during normal operation and a logic 1 when a signal is lost. The output must be connected via a pull-up resistor in the range of 4.7 kΩ – 10 k? on the host device side. The LOS hysteresis ranges from 0.5 to 5 dB.
BASIC SPECIFICATIONS
Format: SFP
Connector: LC duplex
Transmission mode: multimode
Data rate: 1G / 2.5G
Wavelength: 850 nm
Range: up to 550 m
Optical output power (min./max.): –9 / –3 dBm
Receiver sensitivity (OMA): –18 dBm
LOS-Deasserted (average): –19 dBm
LOS-Asserted (average): –35 dBm
LOS hysteresis: 0.5–5 dB
Receiver differential output voltage: 300–600 mVpp
Digital diagnostics: DDM