Šakotuvas Den Braven Cheminis inkaras VINYLESTER ECO

Professional two-component chemical system based on vinyl ester resins for fast and strong anchoring. Does not contain styrene. Can also be used indoors and outdoors with high application temperatures up to +40 °C. Allows anchoring to all types of substrates such as concrete, masonry, hollow brick, natural stone, block, and lightweight concrete. Suitable for extreme loads and fixing of wooden or steel structures, threaded rods, facade elements, sports equipment, scaffolding, foot rails, posts, fences, cable trays, handrails, awnings, gates, etc. Where is it suitable? indoors and outdoors Anchoring in concrete, masonry, brick, stone, etc. for anchoring wooden or steel structures or facade elements anchoring of sports equipment, scaffolding, foot rails, posts, fences, cable trays, handrails, awnings, gates, etc. What to look out for? the hole must be thoroughly cleaned before application proper mixing of both components (grey colour) use a mechanical or electric application gun for extrusion How to anchor? first drill a hole of the required dimensions clean the hole properly with a brush and pump using the application gun, push the first 10 cm or so out of the hole until the anchor is grey in colour then apply the material directly into the hole insert the threaded rod or other elements with a rotating motion What makes it stand out? Extreme strength of the anchored joint can be applied even in flooded boreholes quickly solidifies reduced odour, styrene-free anchoring of threaded rods M8 - M24