Maršrutizatorius Hikvision 6 prievadų komutatorius DS-3E1506P-EI / M (valdomas), žema kaina

Patvirtinimai
Cheminių komponentų sertifikavimas Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU)
EMC CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Saugumas CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)

Bendra informacija
Matmenys (P × A × G) 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
Bendras svoris 0.77 kg (1.7 lb)
Installation Mode Desk-Mounted,Wall-Mounted
Maks. energijos suvartojimas 50 W
Grynasis svoris 0.27 kg (0.6 lb)
Darbo drėgmė 5% to 95% (no condensation)
Darbinė temperatūra 0 °C to 40 °C (32 °F to 104 °F)
Energijos sunaudojimas miego režime 1.8 W
Maitinimo šaltinis 54VDC, 0.92A
Santykinė drėgmė 5% to 95% (no condensation)
Rėmas Metal material
Laikymo temperatūra -40 °C to 85 °C (-40 °F to 185 °F)
Apsauga nuo viršįtampių 6 KV

Tinklo parametrai
Vidinė cache atmintis 1 Mbits
MAC adresų lentelė 2 K
Paketų perdavimo sparta 10.42 Mpps
Prievadai 4 × Gigabit PoE port,2 × Gigabit RJ45 port
Perjungimo našumas 14 Gbps

PoE
Maks. PoE prievadų galia 30 W
PoE prievadas PoE: Ports 1 to 4
PoE maitinimo biudžetas 45 W
PoE galios jungtis End-span: 1/2(-), 3/6(+)
PoE standartas IEEE 802.3af,IEEE 802.3at

Programinės įrangos funkcijos
HPP Support one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
Ryšio agregavimas Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.Support static link aggregation.Support 2 aggregation groups.
Ilgo diapazono režimas Ports 1 to 4: up to 300 m.Long range performance may vary depend on camera model or cable condition.
Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP.Suppport 802.1w RSTP.
PoE Watchdog Ports 1 to 4: auto detect and restart the cameras that do not respond.
Prievadų izoliacija Ports 1 to 4: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
System Maintenance Support device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support port mirroring for fault locating.
VLAN VLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 32 VLAN.

Pastebėjote klaidą prekės aprašyme ar nuotraukų galerijoje? Praneškite mums.

Skaityti daugiau

Skaityti mažiau