Maršrutizatorius 10 prievadų, 8 PoE komutatorius Hikvision DS-3E1510P-EI / M(B), žema kaina

Patvirtinimai
Cheminių komponentų sertifikavimas Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU)
EMC CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Saugumas CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)

Bendrieji duomenys
Dydis 217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')
Bendras svoris 1.08 kg (2.38 lb)
Installation Mode Desk-Mounted,Wall-Mounted
Maks. energijos suvartojimas 86 W
Grynas svoris 0.54 kg (1.19 lb)
Darbo drėgnumas 5% to 95% (no condensation)
Darbo temperatūra 0 °C to 40 °C (32 °F to 104 °F)
Energijos sunaudojimas miego režime 2.5 W
Energijos šaltinis 54VDC, 1.6A
Santykinė drėgmė 5% to 95% (no condensation)
Rėmas Metal material
Laikymo temperatūra -40 °C to 85 °C (-40 °F to 185 °F)
Apsauga nuo viršįtampio 6 KV

Tinklo parametrai
Vidinė cache atmintis 1.5 Mbits
MAC adresų lentelė 4 K
Paketų persiuntimo greitis 14.88 Mpps
Jungtys 8 × Gigabit PoE port,2 × Gigabit RJ45 port
Perjungimo talpa 20 Gbps

PoE
Maks. PoE prievadų galia 30 W
PoE prievadas PoE: Ports 1 to 8
PoE galios biudžetas 80 W
PoE galios jungtis End-span: 1/2(-), 3/6(+)
PoE standartas IEEE 802.3af,IEEE 802.3at

Programinės įrangos funkcijos
HPP Support one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
Ryšių sujungimas Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.Support static link aggregation.Support 3 aggregation groups.
Ilgo diapazono režimas Ports 1 to 8: up to 300 m.Long range performance may vary depend on camera model or cable condition.
Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP.Suppport 802.1w RSTP.
PoE Watchdog Ports 1 to 8: auto detect and restart the cameras that do not respond.
Prievado izoliacija Ports 1 to 8: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
System Maintenance Support device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support port mirroring for fault locating.
VLAN VLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 32 VLAN.

Pastebėjote klaidą prekės aprašyme ar nuotraukų galerijoje? Praneškite mums.

Skaityti daugiau

Skaityti mažiau