TOLAS "Sodastream" mėlynos spalvos kasečių užpildymo įrenginys

Sodastream cartridge filling hose, version one, blue

• length of the shroud: 61.5 cm
• cable length: 51 cm
• input: thread W21.8×1/14
• output: Tr21/4
• air vent:  YES
• pressure gauge:  YES
• weight:  100g
• material: aluminum

Filling Instructions:

• Screw the shunt onto the mother's CO2 cylinder.
• Insert the cartridge into the shunt socket.
• Check if the air release valve (silver) is closed, if not, close it.
• Set the copper knob to the ON position (cartridge valve opening).
• Gently unscrew the valve on the cylinder (you will hear a hissing sound).
• The filling process is in progress.
• Once the filling process is complete, close the cylinder valve and set the copper knob to the OFF position.
• Unscrew the vent valve (silver) – you will hear a short hiss (if it hisses all the time, check if the cylinder valve is properly tightened).
• Remove the cartridge from the slot.
• Ready!

Our advice:

• when using a mother bottle without a sedimentation tube, you have to turn it upside down
• release any remaining gas from the cartridge before refilling
• you will fill the empty cartridge completely, if you put it in the freezer before filling it, it should be cold
• when filling, place the cartridge on the scale to control the amount of CO2 being transferred, you can transfer a maximum of 425g of carbon dioxide

Dujų balionai