EVOLVEO DoorPhone ID-2

- 2-wire installation - quick installation without complicated wiring
- Fingerprint + RFID - convenient keyless unlocking
- Full HD camera (1080p) - crisp visitor image
- Wide 170° viewing angle - maximum visibility before entering
- 2 call buttons - ideal for two households or separate entrances
- TUYA app - for remote management

State-of-the-art entry system for two households and more demanding operations
The EVOLVEO DoorPhone ID2 extends the capabilities of the ID1 with a two-button outdoor unit that is ideal for two-family homes, semi-detached houses, offices or a combination of home and business. Each button can call on a different monitor or group of monitors, so different parts of the home or business operate independently, yet within the same system.
At the core is an integrated biometric fingerprint reader and RFID card and chip support. Coming home with full bags? Just put your finger on it and the door opens. A client coming to the office or a visitor to the second home? Everyone can have their own access without having to hand over keys. The ID2 model allows configuration for up to four users depending on wiring, so it easily adapts to a larger home or smaller business facility.
Access management is done directly in the system. Simply deactivate a lost chip, add a new one in seconds, and you don't have to deal with changing locks or mechanical intervention. All biometric data remains stored directly in the device and is not transferred anywhere.

Anywhere access overview and expansion with additional cameras
The modern home or business today doesn't stop at the front door. DoorPhone ID2 allows remote management via a mobile app, so you have control over your entry even when you're not on site.
Does the courier ring while you're at work? Your phone displays the image from the Full HD camera with a resolution of 1920×1080 px and a wide 170° viewing angle, so you can see not only the visitor, but also the area around them. You can communicate with him and decide whether to open the entrance or arrange another date.
The system also supports the integration of ONVIF IP cameras. Thus, the monitor can display not only the image from the outdoor unit, but also from other security cameras, for example, from the area near the gate, the access to the property or the rear entrance. In practice, it thus acts as a central image point of a house or smaller building. When you ring the bell, you can see the entrance, switch to the camera at the gate in a moment and have a complete overview of the situation.

7" touchscreen monitor as a communication and intercom centre
The indoor unit is not just a screen for taking calls. The seven-inch capacitive touchscreen monitor with a resolution of 1024 × 600 px acts as the communication centre of the entire system.
The ID2 fully supports intercom between monitors. If there are multiple units in the house, you can communicate internally between them without having to use the phone. In practice, this means that you can simply call upstairs from the ground floor, inform the family of a visitor or connect the reception desk to the rear entrance in the office. Communication is two-way and natural, with no delays.
The monitor can also serve as a digital photo frame. In standby mode, it displays photos stored on a microSD card and fits naturally into the interior. It does not act as a technical panel, but as a part of the home. The interface is clear and intuitive, managing users and access rights directly on the display in just a few steps.

Door, gate and garage door control
The outdoor unit is equipped with two independent NO/NC relay outputs. One output can control an entrance door or gate, the other, for example, a sliding door or garage door. Control is possible from the monitor, via the mobile app, or via fingerprint or RFID.
Are you coming home by car? Open the gate before you even arrive at the property. Expecting a client or visitor? Open the entrance without having to be physically present. The system adapts to both the family home and the business operation.


PARAMETERS:
Indoor monitors:
- Display: 7" TFT LCD, capacitive touch
- Resolution: 1024×600
- Active area: 154×85mm
- Aspect Ratio: 16:9
- Communication: 2-wire system (non-polarized), digital IP protocol
- Connectors: BUS, POWER, BELL, CHIME, GATE2, LAN (RJ45), TF slot
- Connection method: 2 wires without polarity (2 × 0.75-1.0 mm2 recommended)
- Memory card: microSD/TF up to 128 GB (eXFAT) (not included)
- Recording: photos and video during call or motion detection
- Photo frame: photo playback from microSD card in standby mode
- Intercom: two-way communication
- System support: up to 4 monitors, 2 outdoor units, 2 ONVIF IP cameras
- Audio: built-in microphone and speaker, full-duplex
- Lock control: 2 independent outputs (Door/Gate)
- Output for lock: potential-free relay 12V / max. 500mA
- WiFi 2.4GHz (IEEE 802.11 b/g/n) + LAN (RJ45)
- Power supply: DC 24 V / 1 A (via BUS)
- Power consumption: < 4 W (standby), < 7 W (operation)
- Operating temperature: -20 °C to +50 °C
- Relative humidity: 10-90% non-condensing
- Dimensions (w × h × d): 200×133×24mm
- Weight: approx. 350g
- Material: ABS
- Mounting: wall-mounted
- Language menu: CZ/EN/SK/HU/RO
- FW update: TF card / LAN

WiFi and online function (Tuya Smart):
- WiFi frequency: 2.4 GHz
- Standards: IEEE 802.11 b/g/n
- Network Integration: Tuya Smart Cloud
- Mobile App: Tuya Smart
- Access Sharing: up to 20 users in the home

Outdoor unit (ID2):
- Number of buttons: 2 (independent calling for two units/users)
- Camera: 2 MP CMOS
- Video resolution: 1920×1080
- Viewing angle: 170°
- Video format: H.264 (MP4)
- Photo format: JPEG
- Night Vision: IR LED illumination, auto switching
- Minimum illumination: 0.1 Lux
- Communication: bidirectional
- Access system:
1) RFID reader 125 kHz (EM card)
2) Fingerprint sensor (capacitive)
3) Fingerprint capacity: up to 100
4) User support: 1-4 (depending on system configuration)
- Lock control
3) Output voltage for lock: DC 12 V / max. 500 mA
- Communication interface: 2-wire bus (non-polarized)
- EXIT button: yes (external button can be connected)
- Protection: IP65
- Material: aluminium alloy (oxidation and scratch resistant)
- Power supply: DC 24 V (via BUS from monitor)
- Operating temperature: -20 °C to +50 °C
- Dimensions (W × H × D): 124 × 236 × 28 mm
- Weight: approx. 700 g
- Mounting: surface or recessed (compatible with EVOLVEO MSB box)

Power adapter:
- Input voltage: AC 100-240 V / 50-60 Hz
- Output: DC 24 V / 1 A
- Power: 24 W
- Type: switching external adapter
- Efficiency: > 85%
- Protection: short circuit, overvoltage, overheating, overload
- Cable length: approx. 1.2 m
- Weight: approx. 120 g

Package contents:
- 2× indoor unit (7" monitor)
- 1× outdoor unit ID2 (2 buttons, RFID + fingerprint)
- 1× DC 24 V / 1 A power adapter
- 1× mounting bracket and mounting material
- 1× interconnection cable set for 2-wire system
- 10× RFID chip 125 kHz
- 1× user manual