EVOLVEO DoorPhone ID-1

- 2-wire installation - quick installation without complicated wiring
- Fingerprint + RFID - convenient keyless unlocking
- Full HD camera (1080p) - sharp visitor image
- Wide 170° viewing angle - more visibility before entering
- Aluminum panel - durable and modern design
- TUYA app - for remote management
EVOLVEO DoorPhone ID-1, 2-wire video phone with RFID, fingerprint and ONVIF camera support

Modern keyless entry that makes sense today and years from now
Entering your home no longer has to mean searching your pockets for keys or dealing with slammed doors. The EVOLVEO DoorPhone ID1 combines a video phone, access control system and modern connectivity into one elegant solution that reflects the needs of today's home. At the heart of the system is an integrated biometric fingerprint reader and support for RFID cards and chips.
User management takes place directly in the system - you can add new fingerprints, delete lost chips or edit permissions. For example, if you lose an RFID chip, simply deactivate it without changing the lock. All biometric data remains stored directly on the device, it is not transferred anywhere.

Access visibility even when you're not at home
The modern home today doesn't stop at the front door. The DoorPhone ID1 allows remote management and communication via a mobile app, so you have control over your entry from anywhere.

7" Touchscreen monitor as a natural part of the interior
An interior unit is not just a passive screen. The dominant feature of the system is the 7" colour touchscreen monitor, which acts as a centre of communication at the entrance and as an elegant part of the interior.
But the monitor doesn't just have to serve as a videophone. Thanks to memory card support, it can also function as a digital photo frame - displaying photos stored on an SD card and fitting naturally into the home even when no one is ringing. In the hallway or living area, it does not act as a technical element, but as a personal part of the home.
The interface is clear and intuitive - at a glance you can see incoming calls, visit history and other information such as the current weather. Adding a new user, changing access rights or managing RFID cards is done directly on the display in just a few steps, without complicated configuration. In practice, this means that when the family comes for the weekend, you can create temporary access in moments. If someone loses an access chip, you simply lock it in the system and replace it with a new one - quickly, without tampering with the door or lock.

Simple installation without unnecessary intervention
The entire system is designed as a 2-wire solution, which makes installation much easier, especially when renovating or replacing an older house phone. The connection between the monitor and the outdoor unit is classically wired - with only two wires providing power and communication at the same time. There is therefore no need to cut new routes or change the complete cabling in the house. In practice, this means that if you already have the original doorbell cable in place, it can often be used for the new system. Installation is faster, cleaner and significantly less expensive.
Internet connectivity is handled by the indoor monitor only. It is equipped with WiFi (2.4GHz IEEE 802.11 b/g/n) for wireless connectivity and also an RJ45 (LAN) port for a stable wired network connection. So you don't have to deal with the network connection of the outdoor panel - everything is concentrated indoors.
The entire system operates online under the Tuya Smart platform, which is known for its simple interface, clear device management and intuitive operation. Adding devices to the app, managing users and remote previewing are all done in a few steps, without complicated network parameter setup.

Control the door, gate and garage door from one place
The EVOLVEO DoorPhone ID1 is not just a videophone, but a full-fledged element of the house entry system. The outdoor unit is equipped with two independent relay outputs that allow you to control multiple devices simultaneously.


PARAMETERS:
Indoor monitor:

- Display: 7" TFT LCD, capacitive touch
- Resolution: 1024×600
- Active area: 154×86mm
- Aspect Ratio: 16:9
- Communication: 2-wire system (non-polarized), digital IP protocol
- Connectors: BUS, POWER, BELL, CHIME, GATE2, LAN (RJ45), TF slot
- Connection method: 2 wires without polarity (2 × 0.75-1.0 mm2 recommended)
- Memory card: microSD/TF up to 128 GB (eXFAT) (not included)
- Recording: photos and video during call or motion detection
- Photo frame function
- Intercom: two-way communication
- System support: up to 4 monitors, 2 outdoor units, 2 IP cameras
- Audio: built-in microphone and speaker, full-duplex
- Lock control: 2 independent outputs (Door/Gate)
- Output for lock: potential-free relay 12V / max. 500mA
- Internet connection:
1) WiFi 2.4GHz (IEEE 802.11 b/g/n)
2) LAN (RJ45)
- Power supply: DC 24V / 1A (via BUS)
- Power consumption: <4W (standby), <7W (operation)
- Operating temperature: -20°C to +50°C
- Relative humidity: 10-90% non-condensing
- Dimensions (w × h × d): 200×133×24mm
- Weight: approx. 350g
- Material: ABS plastic
- Mounting: wall mounted (bracket and mounting material included)
- Language menu: CZ/EN/SK/HU/RO
- Application language: CZ/SK/EN/HU/RO
- Manual language: CZ/SK/EN/HU/RO
- FW update: TF card / LAN

WiFi and online function (Tuya Smart):
- WiFi frequency: 2.4 GHz
- Standards: IEEE 802.11 b/g/n
- Network Integration: Tuya Smart Cloud
- Mobile App: Tuya Smart
- Access Sharing: up to 20 users

Outdoor unit:

- Camera: 2 MP CMOS
- Video Resolution: 1920×1080
- Viewing angle: 170°
- Video Format: H.264 (MP4)
- Photo format: JPEG
- Night Vision: IR LED illumination, auto switching
- Minimum illumination: 0.1 Lux
- Communication: two-way (microphone + speaker)
- Access system:
1) RFID reader 125 kHz (EM card)
2) Fingerprint sensor (capacitive)
3) Fingerprint capacity: up to 100
4) User management: 1-3 (ID1)
- Lock control:
1) 2 outputs (Door 1 / Gate)
2) NO/NC relay
3) Output voltage for lock: DC 12V / max 500mA
- Communication interface: 2-wire bus (non-polarized)
- EXIT button: yes (internal button can be connected)
- Protection: IP65
- Material: aluminium alloy (oxidation and scratch resistant)
- Power supply: DC 24V (via BUS from monitor)
- Operating temperature: -20°C to +50°C
- Dimensions (W × H × D): 124×236×28mm
- Weight: approx. 650 g
- Mounting: surface or recessed (compatible with EVOLVEO MSB box)

Power adapter:
- Input voltage: AC 100-240V/50-60Hz
- Output: DC 24V / 1A
- Output: 24W
- Type: switching external adapter
- Efficiency: >85%
- Protection: short circuit, over voltage, over temperature, overload
- Cable length: approx. 1.2m
- Weight: approx. 120g

Package contents:
- 1× indoor unit (7" monitor)
- 1× outdoor unit (camera + RFID + fingerprint)
- 1× DC 24 V / 1 A power adapter
- 1× mounting bracket and mounting material
- 1× interconnection cable set for 2-wire system
- 10× RFID chip 125 kHz
- 1× user manual