Bublue Bubot 300PPool Cleaning Robot

Bublue Bubot 300P Pool Cleaning Robot

The Bublue Bubot 300P is a modern pool cleaning robot designed to remove debris from the bottom and clean near the walls—without the need for manual intervention. Thanks to its high power (33 W), it effectively removes sand, leaves, and small debris in a single cycle. It operates wirelessly for up to 90 minutes, and fast charging means it’s ready for the next cycle in about 3 hours. The DirtLock™ Tech 2.0 system effectively traps debris in the filter basket, while intelligent wall detection helps it navigate. Additionally, the self-parking feature allows you to conveniently remove the robot once it has finished working. The unit is complemented by LED lights that indicate the device’s status.

Bluehole Technology™ – effectiveness visible after a single cycle

The new Bluehole Technology™ is responsible for the high cleaning effectiveness, as it optimizes the interaction between the nozzle, motor, and suction impeller. This translates to up to twice the overall performance compared to previous solutions, as well as 3× better leaf collection efficiency and 8.5× higher efficiency in removing debris ranging from 3 to 8 mm in size (compared to the previous generation). As a result, a single cleaning cycle is enough to restore cleanliness without the need for manual vacuuming or repeatedly restarting the device.

Smart sensors, autonomous docking, and clear LED indicators

The Bublue Bubot 300P pool robot is designed for maximum user convenience, which is why it uses advanced contact sensors that enable quick and precise responses to pool walls. The Corner Boost™ technology increases cleaning intensity in corners, offering up to twice the dirt removal efficiency in these critical areas. Upon contact with the edge, the robot automatically corrects its path, moving smoothly and without erratic bounces, which results in smoother and more effective cleaning of the pool floor. After completing a cycle, the device autonomously docks against the pool wall, making it quick and convenient to remove from the water. In addition, built-in LEDs provide real-time information on the device’s operating status, charge level, and readiness.

Dual Filtration and DirtLock™

The dual filtration system combines two filter levels with 80- and 150-mesh density, effectively capturing both larger debris such as leaves and fine sand or sediment. This solution increases average suction efficiency by up to 15% and helps maintain cleaner water throughout the entire operating cycle. This is complemented by DirtLock™ technology, which allows water to be quickly drained from the robot in about 5 seconds, reducing maintenance time by up to 80% and preventing nearly 100% of collected debris from flowing back into the pool. Additionally, the optimized basket design provides up to 30% more capacity compared to standard solutions, meaning longer operation without the need for frequent emptying.

Precise component coordination – stable suction power throughout the entire operating cycle

In the Bublue Bubot 300P model, the optimized suction system plays a key role, with the nozzle, motor, and impeller operating in full synchronization. This design allows for smooth flow of water and debris throughout the system, without power loss or sudden drops in performance. The precise alignment of these components ensures stable, effective suction of both fine particles and larger debris—regardless of how dirty the pool floor is. The result is consistent robot operation, improved energy efficiency, and consistently high cleaning performance from start to finish.

Long runtime and fast charging – ready to clean whenever you need it

The robot is equipped with a 4400 mAh battery, providing up to 90 minutes of uninterrupted operation, which allows for thorough cleaning of the pool floor in a single cycle. After cleaning, the device charges in about 3 hours, quickly returning to full readiness and requiring no long breaks between uses. This combination of runtime and charging time makes the Bublue Bubot 300P ideal for above-ground pools with an area of up to approximately 80 m² and a flat bottom.

Simple maintenance – cleaning the robot without tools and effortlessly

After use, simply rinse the filter and the robot’s housing with a standard garden hose – no need to disassemble the device or use additional accessories. This cleaning method easily removes sand, leaves, and small debris.

Included in the set:

• Pool cleaning robot
• Charger
• Hook for removing the robot from the water
• Handle
• Brush x2
• User manual