Prekės Pavadinimas:
Automatic Transmission Overload Switch
Gamintojo numeris:
A0025454514
Prekės ženklas:
MERCEDES-BENZ
Papildoma informacija:
A transmission overload protection is integrated in the EZL/AKR control unit in order to protect the shift elements of the automatic transmission from thermal stresses during gearshifts under load in the top engine speed range. The transmission overload protection retards the ignition point to 5° CS before TDC (reduced engine torque) for approximately 400ms during the 1 --> 2 and 2 --> 3 upshifts.
The transmission overload protection switch, brake band B1 (S65) use designed as a hydraulic pressure switch and is connected to the working pressure circuit of brake band B1 of the automatic transmission. The switching function of the transmission overload protection switch, brake band B1 (S65) is dependent on the working pressure which exists at B1. The opening and closing of the transmission overload protection switch, brake band B1 (S65) is detected by the EZL/AKR control unit as a switching signal.
Failure of the Transmission Overload Protector Switch can result in a feeling of a misfire at high speed. If you have this sensation in your car, check the wiring to the Transmission Overload Protector switch, and replace the switch if necessary.
This brand new Transmission Overload Protector Switch comes directly from Mercedes-Benz and is sure to fit and function just like the original.
Tinka:
MERCEDES-BENZ SL (R129) 2001