PremiumCord Ultra High Speed ​​​​HDMI 2.1 optinio pluošto kabelis 8K@60Hz, auksinis 20m

Optical HDMI 2.1 Ultra High Speed 8K@60Hz or 4K@120Hz cable is used to connect two audio/video devices via modern HDMI interface, such as HD-DVD/BluRay player and LCD/Plasma TV.The cable transmits digital audio and video and supports HDCP digital content protection.

- HDMI 2.1 Ultra High Speed active optical fiber cable, supports HDMI2.1 or lower HDMI2.0 and HDMI1.4
- Supports Ultra High Definition resolution 8K@60Hz, 4K@120Hz, YUV 4:4:4
- Maximum data transfer rate: 48 Gbps
- Hybrid 5mm optical cable - 4x OM3 optical fiber + 7x conductors
- Gold plated connectors: HDMI type A (19pin) male <=> HDMI type A (19pin) male
- Resolution: 8K UHD (7680p) at 60Hz, 4K UHD (3840p) at 120Hz or lower supported formats 1080p FULL HD/1080i/720p/720i
- Optical cable is backward compatible to HDMI 2.0a, 2.0, 1.4 and below
- Supports eARC, ARC, HEC, EDID, DDC
- Supports CEC ( Consumer Electronics Control )
- Supports HDR (High Dynamic Range)
- Supports VRR (Variable Refresh Rate), ALLM (Auto Low Latency Mode)
- Supports 4:4:4 Color Subsampling
- 3D video over HDMI connection
- Supports HDCP1.4/HDCP2.2/HDCP2.3
- Multi-Dimensional Audio Formats Supported (Dolby Atmos and DTS:X etc.)
- Dolby TrueHD and DTS-HD Master Audio Bitstream Compatible
- Supports Audio Return Channel (ARC)
- HDMI Ethernet Channel (HEC) Compatible
- Support EDID
- Complete power supply with HDMI bus consumption less 250mW, no need external power supply
- 5mm optical cable thickness
- Optical fiber: OM3 Multimode Fibre Optic
- Braid coated cable
- Gold plated connectors in metal caps
- Flexible optical cable for small bend radius: 20mm
- Optical cable is packed in a paper box with instructions and labelled with description and EAN code
- Connector dimensions: HxWxD / 51x19x9mm (connector dimensions without grommet)
- Support for Sony PS5 console
- Cable colour: black/white braid
- Connector colour: black/beige
- Cable length: 20m

The cable contains active electronics that only work in one signal direction.The cable must always be plugged in with the devices switched off and only in the direction marked on the cable.
The connector marked "Source" is always plugged into the transmitting device (DVD, Blueray).
The connector marked "Display" is always plugged into the display device (LCD, TV, projector).