PremiumCord 8K Optical DisplayPort 1.4 Connection Cable M/M, auksinis-plated connector 10m

PremiumCord 8K Optical DisplayPort 1.4 Connector Cable M/M, gold-plated connectors 10m The AOC optical cable features excellent signal transmission over long distances without loss, is resistant to electromagnetic interference and gives the best possible picture compared to metallic cables. The optical DisplayPort cable is used to connect two audio/video devices via a modern DisplayPort interface, such as an HD-DVD/BluRay player and an LCD/Plasma TV. Thanks to AOC technology and optical fiber, the cables are available in 10m, 15m, 20m, 25m, 30m and 50m lengths. The cable's thin and lightweight construction makes it suitable for all kinds of installations. - Maximum resolution: - 8K (7680x4320) at 60Hz and 24 bit color depth - 5K (5120x2880) at 60Hz and 30 bit colour depth - 4K (3840×2160) at 144Hz and 24 bit colour depth - FULL HD 1080p (1920x1080) at 144Hz - Optical cable converts electrical data signals to optical signals and back to electrical signals, a special chip is integrated in the connectors, so the cable is unidirectional and the connectors are marked SOUCE and DISPLAY - Supports DisplayPort 1.4 standard - Maximum data transfer rate: 32.4 Gbps - Gold-plated connectors: DisplayPort male DisplayPort male - Supports HDCP2.2 , 3D and EDID - Complete power supply with DisplayPort bus, does not need external power supply - Round thin optical cable (internal structure: optical cable + metallic conductors) is suitable for all installations - Optical cable thickness 4.6mm - Thanks to the glass fibre, the cable is highly flexible and offers a very small bending radius of 20mm - Optical fiber: OM3 Multimode Fibre Optic - Gold-plated contact surfaces ensure optimal signal transmission and prevent corrosion - Cable colour: black - Operating temperature: 0°C to 50°C - Packed in paper box with EAN code and description + manual - Cable length: 10 m The cable contains active electronics that only work in one signal direction.The cable must always be plugged in when the devices are switched off and only in the direction marked on the cable. The connector marked "Source" is always plugged into the transmitting device (DVD, Blueray). The connector marked "Display" is always plugged into the display device (LCD, TV, projector).