Filament eSun PLA-Matte Rainbow 1.75mm (mėlynas-žalias)

eSun PLA-Matte Rainbow 1.75mm Filament

The eSun PLA-Matte Rainbow filament in blue-green for 3D printing combines color gradients with a matte finish and a smooth surface on prints. The changing colors allow you to create interesting color variations in your models using a single spool of filament. The filament has a density of 1.329 g/cm³, good printing properties, and allows for easy removal of support structures. It is ideal for creating decorations, decorative figurines, cosplay props, and prototypes.

Matte Finish and Applications

The matte finish gives models a subdued appearance and reduces the visibility of light reflections on their surface. The smooth finish makes the material well-suited for creating ornaments and models intended for display. This filament is recommended primarily for indoor use, as it is not resistant to UV radiation or exposure to acids and bases. The heat deflection temperature is 50.2°C, so finished prints should not be exposed to high temperatures, such as inside a hot car or in areas with strong sunlight.

Printing Parameters and Usage Guidelines

The eSUN PLA-Matte Rainbow filament is designed for 3D printing with a nozzle temperature ranging from 210–230°C and a build plate temperature of 65°C. The recommended build plate material is PEI, and the nozzle diameter is 0.4 mm. The print speed should be below 300 mm/s, with airflow set to 100%. Before starting the print, it is recommended to dry the filament at 60°C for more than 8 hours. To achieve a better surface quality, it is recommended to enable Z-seam alignment and start point alignment, disable Z-axis lift during idle passes, and optimize the print path accordingly. If necessary, it is also advisable to reduce the print speed.