3D Spausdinimo Filamentas - eSUN PLA-Silk Mystic 1,75 mm, 1kg, Auksinė-Sidabrinė-Varinė

eSun PLA-Silk Mystic 1.75 mm Filament

eSun PLA-Silk Mystic 1.75 mm filament is a 3D printing material made from modified PLA, characterized by a silky sheen and a three-color effect. The gold-silver-copper color scheme makes the printed models change their appearance depending on the viewing angle. The material combines an attractive finish with the ease of printing characteristic of PLA. It is suitable for creating figurines, decorations, ornaments, and other models where surface appearance is important. The spool contains 1 kg of filament.

Three colors and a silky sheen

Thanks to the combination of multiple colors in a single filament, the finished prints take on a unique appearance. As you rotate the model, different color combinations become visible, shifting with the viewing angle. The silky sheen gives the surface a smooth, decorative appearance, making figurines, vases, and ornaments look attractive without the need for painting. This solution is particularly useful for projects where the visual effect is key.

Easy printing and good material properties

PLA-Silk Mystic filament produces aesthetically pleasing prints when the printer settings are properly adjusted. The recommended nozzle temperature is 190–230°C, and the recommended heated bed temperature is 45–60°C. A heated bed is required. The material allows printing at speeds of up to 200 mm/s; however, to achieve a more pronounced gloss, it is advisable to slow down the printing of outer walls. The tensile strength in the XY plane is 40.13 MPa, and the flexural strength in the same plane is 60.2 MPa. The heat deflection temperature is 54.7°C, so this filament is best suited for decorative models and lightly loaded parts that will not be exposed to high temperatures.