3D Plastikas – Filamentas PA6-GF With spool / Su rite oranžinės spalvos | 1.75 mm, 1kg | Bambu Lab, modelis - BML-25558, žema kaina

Bambu ABS-GF

Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.

3D Plastikas – Filamentas PA6-GF With spool/Su rite oranžinės spalvos | 1.75 mm, 1kg | Bambu Lab aprašymas - Prekės nuotrauka

Enhanced Strength and Stiffness

ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.

	ABS	ABS-GF	Improvement %
Stiffness (Bending Modulus - XY)	1880 MPa	2860 MPa	52.1%
Strength (Bending Strength - XY)	64 MPa	68 MPa	6.3%
Layer Strength (Bending Strength - Z)	39 MPa	46 MPa	17.9%
Heat Resistance (HDT, 0.45 MPa)	87 °C	99 °C	13.8%

Greater Dimensional Stability

Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.

Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%

Fine Matte Finish

The seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.

Water Resistance & Built to Last

With improved water resistance and durability, Bambu ABS-GF is ideal for printing long-lasting production and household items, like mechanical casings, connectors and molds.

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Smooth PEI Plate, Textured PEI Plate	Cool Plate SuperTack
Hotend	Hotend with Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm	Hotend with Stainless Steel Nozzle All Size
Glue	Bambu Liquid Glue Glue Stick	/

ABS-GF Hex Code Table

Color	Hex Code	Display
White	#FFFFFF
Gray	#C6C6C6
Yellow	#FFE133
Orange	#F48438
Red	#E83100
Green	#61BF36
Blue	#0C3B95
Black	#000000

Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

	ABS	ABS-GF	PA6-GF
Composition	Acrylonitrile - butadiene - styrene	Acrylonitrile - butadiene - styrene, glass fiber	PA6, glass fiber
AMS Compatibility	YES	YES	YES
Dry Out Before Use	Recommended	Recommended	Required
Printing Speed	< 300 mm/s	< 180 mm/s	< 130 mm/s
Printer Type	Enclosure	Enclosure	Enclosure
Toughness (Impact Strength - XY)	39.3 kJ/m²	14.5 kJ/m²	27.2 kJ/m²
Strength (Bending Strength - XY)	62 MPa	68 MPa	120 MPa
Layer Strength (Bending Strength - Z)	39 MPa	46 MPa	51 MPa
Stiffness (Bending Modulus - XY)	1880 MPa	2860 MPa	3670 MPa
Layer Adhesion (Impact Strength - Z)	7.4 kJ/m²	5.3 kJ/m²	4.1 kJ/m²
Heat Resistance（HDT, 0.45 MPa)	87 °C	99 °C	182 °C
Saturated Water Absorption Rate/%（25 °C, 55% RH）	0.65	0.53	2.56

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	80 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	240 - 270 °C
Bed Temperature (with Glue)	80 - 100 °C
Printing Speed	< 180 mm/s

Physical Properties
Density	1.08 g/cm³
Vicat Softening Temperature	103 °C
Heat Deflection Temperature	99 °C
Melting Temperature	202 °C
Melt Index	7.56 ± 1.4 g/10 min

Mechanical Properties
Tensile Strength	36 ± 3 MPa
Breaking Elongation Rate	6.3% ± 1.2%
Bending Modulus	2860 ± 130 MPa
Bending Strength	68 ± 4 MPa
Impact Strength	14.5 ± 1.5 kJ/m²

Pastebėjote klaidą prekės aprašyme ar nuotraukų galerijoje? Praneškite mums.

Skaityti daugiau

Skaityti mažiau